Details for: OLYMPUS C-3020 Zoom

Not logged in

You may register here, if you have no login yet.

Details for: OLYMPUS C-3020 Zoom	Status
( Digital Camera )	( Category: Image )

ID	0x7B4:0x105
Driver	usb-storage
Linux-USB link	http://www.schubart.net/c3040zoom/linux-usb.html
Vendor link	http://www.olympus.com
Comment	SuSe linux V7.1 - Install Setup Olympus Digital Camera model C3020 Zoom to work under SuSe Linux V7.1 1 - In /etc/rc.config set START_USB="yes" 2 - Add to /etc/usbmgr/usbmgr.conf .......... ## CAMERA section # C3100Z/C3020Z [Olympus] VEND
Submitted by	info <at> elliomartina.com
Submitted on	Sun, 14 Jul 2002 00:10:31 +0200
Last edited on	Tue, 16 Jul 2002 00:48:24 +0200



User comments	Please login to add comments

Ellio Martina
(info <at> elliomartina.com)

2002-07-16 13:57:40

Here is the complete text with above entry: *** Setup Olympus Digital Camera model C3020 Zoom to work under SuSe Linux V7.1 *** 1 - In /etc/rc.config set START_USB="yes" *** 2 - Add to /etc/usbmgr/usbmgr.conf .......... --- ## CAMERA section --- # C3100Z/C3020Z [Olympus] --- VENDOR 0x7B4 PRODUCT 0x105 module scsi_mod , sd_mod , usb-storage *** 3 - mkdir /camera (or whatever you like) *** 4 - Add to /etc/fstab /dev/sda1 /camera vfat ro,noauto,user 0 0 --/dev/sda1 is the device with my PC-setup *** 5 - type /sbin/update_usbdb -f /etc/usbmgr/usbmgr.conf [ENTER] *** 6 - type /etc/int.d/usbmgr restart [ENTER] *** Now you can connect the camera and switch to the play (image dowlaod to PC) modus usbmgr will start usb-storage *** Then mount /camera and voilà, you will see your photos. (umount /camera after you have finished downloading) *** I think this should work for other Olympus or other Dig. Cameras using the storage modus just fill in the right Vendor and product ID *** SuSe7.1 uses kernel 2.4.0. Later versions as I understood, do no longer use usbmgr so you might have to edit/enter the id for the camera elsewhere.